Area of Triangular Land: 3 Formulas and a Worked Example

To calculate the area of a triangular piece of land, measure all three sides and use Heron's formula: take half the perimeter (s), then area = √( s × (s − a) × (s − b) × (s − c) ). If you can measure a base and the straight-line height to the opposite corner, area = ½ × base × height is even simpler. Multiplying two sides and halving the result is only correct when those two sides meet at a square corner.

Below are the three formulas, when each one fits, a worked example with real numbers, and the mistakes that most often give a wrong figure on corner lots and wedge-shaped fields.

Which formula to use

What you can measure Formula Good for
All three sides Heron's formula Any triangle; needs only a tape or a measuring wheel
One side and the height to the opposite corner ½ × base × height Open ground where you can walk a perpendicular line
Two sides and the angle between them ½ × a × b × sin(angle) When you have a plan or a deed with bearings
Two sides that meet at 90° ½ × a × b Right-angled corner lots only

All four give the same answer for the same triangle. Choose by what is easiest to measure on your land.

Method 1: three sides (Heron's formula)

This is the method most people need, because three sides are easy to measure and they fix the shape completely. A triangle cannot flex the way a four-sided plot can.

  1. Measure the three sides: a, b and c.
  2. Check that they can form a triangle: the two shorter sides added together must be longer than the longest side. If they are not, one measurement is wrong.
  3. Find the semi-perimeter: s = (a + b + c) ÷ 2.
  4. Calculate the area: √( s × (s − a) × (s − b) × (s − c) ).

Worked example

A triangular lot between two roads has sides of 120 ft, 150 ft and 180 ft.

Converted:

Method 2: base and height

Pick one side as the base. The height is the shortest distance from the opposite corner to that side, measured at a right angle to it, not along either of the other sides.

Area = ½ × base × height.

On the lot above, take the 180 ft side as the base. The perpendicular distance from the far corner to that side is about 99.2 ft, so:

½ × 180 × 99.2 = 8,928 ft²

That matches the three-side result. The hard part in practice is keeping the height line square to the base. A 3-4-5 check helps: mark 3 ft along the base, 4 ft along your height line, and the gap between those two marks should be 5 ft.

Method 3: two sides and the angle between them

If a plan gives you two sides and the angle where they meet, area = ½ × a × b × sin(angle).

On the same lot, the 120 ft and 180 ft sides meet at about 55.8°. The sine of 55.8° is 0.827, so:

½ × 120 × 180 × 0.827 = 8,932 ft²

The small difference comes from rounding the angle. Phone compasses are not precise enough for this method; use it with angles from a survey plan.

The common mistake: halving two sides

Many people multiply two sides and divide by two. That is the right-triangle formula, and it only works when those two sides meet at exactly 90°.

Try it on the example: ½ × 120 × 180 = 10,800 ft². The true area is 8,929 ft², so the shortcut is 21% too high, almost 1,900 ft² of land that does not exist. The shortcut always overestimates, and the error grows as the corner moves away from square.

When the corner really is square, the shortcut is fine. A lot with legs of 90 ft and 120 ft and a long side of 150 ft is a right triangle (90² + 120² = 150²), and its area is ½ × 90 × 120 = 5,400 ft², or 0.124 acre.

When the land is not a perfect triangle

Real triangular lots rarely have three straight edges. A road frontage curves, a creek wanders, or one corner is clipped to make a short fourth side.

If you also need the length of fencing, add the three sides. More on that in how to measure land perimeter.

Skip the tape: tap three corners on a map

Measuring three sides through brush, across a ditch or along a busy road is slow. If you can see the corners from above, a map does the same job in a minute.

Field Maps with Area Measure runs on iPhone and iPad (iOS 17 or later). Tap the three corners on a satellite map, using the magnifier loupe to set each point precisely, and the app shows the area and perimeter straight away. If the corners are hidden by trees, walk the boundary with GPS instead and the app records the path and closes the shape. Results can be shown in square feet, square yards, acres, square metres or hectares, and each measurement is saved under a name. GPS tracking and measuring work offline; a map area you have never opened needs a connection to load its imagery. There is no Android version yet.

A curved or clipped edge is no extra work on a map: add as many points as the boundary needs.

Keep in mind that phone GPS is typically accurate to about 3–5 m (10–16 ft) under open sky and worse under trees or near buildings. On a small triangular house lot, tapping corners on the satellite image is usually the better choice than walking.

Quick conversions

FAQ

How do I find the area of a triangular lot with three different sides?

Use Heron's formula. Add the three sides and halve the total to get s. Multiply s by (s − a), (s − b) and (s − c), then take the square root. For sides of 120, 150 and 180 ft the area is 8,929 ft², about 0.205 acre.

Can I just multiply two sides and divide by two?

Only if those two sides meet at a right angle. On any other triangle this overestimates the area, by 21% in the example above.

How many acres is a triangular plot?

Work out the area in square feet and divide by 43,560. If your figure is in square metres, divide by 4,046.86.

Is this good enough for a sale or a boundary question?

No. A tape, formula or phone measurement is an estimate for planning, fencing or comparing with your documents. For a sale, a dispute or anything official, rely on a licensed surveyor and the land records.

← All guides