How to Divide Land into Equal Parts: Shapes, Formula, Example

To divide land into equal parts, measure the whole plot, divide its area by the number of parts, and then place each dividing line so the piece it cuts off has exactly that area. On a rectangle you can simply divide the side you cut along. On any other shape, equal spacing gives unequal pieces, so you place a trial line, measure the piece, and move the line until the area matches.

The rest of this guide shows how to do that by hand and on a map, with a worked example where the obvious split is off by thousands of square metres.

Step 1: measure the whole plot

Everything depends on the total, so get it right first. Trace the boundary on a satellite map, walk it with GPS, or work it out from measured sides. If the plot has four unequal sides, see how to calculate the area of irregular land.

Measure twice, ideally in two different ways. If the results differ by more than a percent or two, find out why before you draw any lines.

Step 2: decide what each share is

"Equal" is not always the goal. Write down each person's share as a fraction or a percentage, then turn it into an area:

share area = total area × share

Before you split, take out anything that will stay in common. A shared access lane, a well or a drainage strip should come off the total first, and the remainder is what you divide. If everyone needs road access, plan the cuts so that every piece touches the road, even if that makes the pieces long and narrow.

Also agree on what "equal" means. Two pieces with the same area can be worth very different amounts if one is wet, shaded or far from the road. Some families split by value instead, which is a conversation to have before anyone measures.

Dividing a rectangle

A rectangle is the easy case. To cut it into n equal parts with lines parallel to one side, divide the other side by n.

A field 200 m long and 90 m wide, split into three strips across its length, gives three pieces of 200 × 30 m, or 6,000 m² each. Check: 3 × 6,000 = 18,000 m² = 200 × 90.

This only works when opposite sides really are parallel and equal. Many plots that look rectangular are a few metres off, so measure all four sides before you rely on it.

Dividing a triangle

A triangle has a neat trick. Divide one side into n equal lengths, then draw lines from the opposite corner to each mark. Every piece has the same height and an equal base, so every piece has the same area.

For a triangular corner plot with a 150 m road frontage, mark the frontage every 50 m and run the lines back to the far corner. You get three equal pieces, and each one keeps 50 m of road.

Dividing an irregular plot

Most real plots have no parallel sides, and here equal spacing fails. The fix is to work by area:

  1. Work out the target area for the first piece.
  2. Draw a trial dividing line where you think it should go.
  3. Measure the area of the piece it cuts off.
  4. Move the line. The distance to shift it is roughly:

shift ≈ (target area − measured area) ÷ length of the dividing line

  1. Measure again and repeat until you're within your tolerance. Then move on to the next piece.

The formula is exact when the land on either side of the line is a straight-sided strip, and close enough in most other cases that one or two rounds will get you there.

Worked example: three equal shares of a plot

A plot fronts a road for 120 m. Its left side runs straight back from the road for 150 m. At the back it's 80 m wide, and the right side slants from the back corner down to the end of the frontage.

The obvious split. Divide the frontage into three equal 40 m pieces, with cuts straight back from the road:

Piece 3 ends up with half of what the others get. That's the trap.

Adjusting the first line. The first cut at 40 m gives 6,000 m², which is 1,000 m² too much. The dividing line is 150 m long, so shift it 1,000 ÷ 150 = 6.67 m towards the left side. The cut moves to 33.33 m, and piece 1 becomes 33.33 × 150 = 5,000 m².

The result.

The shares are equal in area, while piece 3 has the most frontage, which you may want to discuss.

Doing it on a map

You don't need to do the geometry with a calculator. On a satellite map, you can:

  1. Trace the whole plot and note the total area.
  2. Trace the first proposed piece as its own shape, using the plot corners plus two points where you want the dividing line.
  3. Compare its area with the target, apply the shift formula, and move the two dividing-line points.
  4. Repeat for each piece, and check that the pieces add up to the total.

Field Maps with Area Measure does this on iPhone and iPad (iOS 17 or later). Tap corners on a satellite map with a magnifier loupe for precise points, or walk the boundary with GPS and let the app close the shape. Measuring area, perimeter and distance is free, and you can save each piece with a name, such as "Share 1", so the whole family can see the same numbers. Pro adds splitting a field into sections and export formats such as KML and Shapefile that you can pass to a surveyor.

Marking the lines on the ground

A line on a map only helps if you can find it in the field. Measure each dividing line from fixed points you can identify, such as a corner post or the end of a fence. Write down the distances along the frontage and along the back boundary, and put temporary stakes in before anyone builds a fence.

Phone GPS is typically accurate to about 3–5 m under open sky. On a 150 m dividing line, a 3 m shift changes a piece by about 450 m². That's fine for planning, but too much for a legal split, which brings us to the surveyor.

When you need a surveyor and the land office

A phone or map measurement is an estimate. It can show you a fair split and help everyone agree, but it does not change who owns what. Formally dividing a property normally needs a licensed surveyor to set out and mark the lines, and the new parcels have to be registered with the land registry or local authority. Many places also have rules on minimum plot size or road access. Check what applies where the land is before you promise anyone a particular piece.

If you're dividing land as part of a sale, our guide to measuring land before buying or selling covers what to check.

FAQ

How do I divide land into two equal parts?

Measure the total area and halve it. For a rectangle, cut through the middle of the side you're dividing. For any other shape, place a trial line, measure one side, and move the line by the area difference divided by the line's length until both halves match.

Why doesn't dividing the frontage equally give equal areas?

Because the plot isn't the same depth everywhere. A strip where the land is deep holds more area than a strip of the same width where the boundary narrows. Only a rectangle or a parallelogram gives equal areas from equal widths.

How do I divide land among heirs with different shares?

Turn each share into an area: total area × the share. Take out any shared lane first, then cut off each piece in turn, adjusting the line until its area matches. The legal split still has to go through the proper registration process.

How accurate does the division need to be?

Agree on a tolerance before you start, such as a percent of each share. For planning, a careful map measurement is usually enough. For a registered division, the surveyor's figures are the ones that count.

Can I divide land into equal parts on Google Maps?

You can measure the whole plot and each proposed piece on a satellite map, then adjust the lines as described above. See our steps for measuring land area on Google Maps.

← All guides